Order Products : sales@su-jiao.com
ElectriPlast® EP-SS/66
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Integral Technologies, Inc. |
| Trademark: | ElectriPlast® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | awm1RI_ElectriPlast-EP-SS-66.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ElectriPlast®EP-SS/66 is a polyamide 66 (nylon 66) product containing stainless steel fiber. It can be processed by injection molding and is available in North America. Features include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.49 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 5810 | MPa | ASTM D638 |
| Tensile Strength (Break) | 84.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.8 | % | ASTM D638 |
| Flexural Modulus | 5370 | MPa | ASTM D790 |
| Flexural Strength | 141 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 42 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 360 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 99.0 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 17 | ohms | ESD STM11.11 |
| Volume Resistivity | 5.7 | ohms·cm | ASTM D257 |
| Static Decay | 10 | msec | Internal method |
| Surface Resistance | 1.7 | ohms | ESD STM11.11 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate | < 15 | mm/min | UL 94 |
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 282 | °C | |
| Middle Temperature | 277 | °C | |
| Front Temperature | 288 | °C | |
| Nozzle Temperature | 288 | °C | |
| Mold Temperature | 76.7 | °C | |
| Back Pressure | 0.517 | MPa | |
| Screw Speed | 50 | rpm |
| Injection instructions |
|---|
| Injection Speed: 1 in/sec1st Stage (injection): 2400 psi2nd Stage (molding): 500 psiDecomposition: 0.5 inch |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| StarMediflex P 7012-1000 | STAR Thermoplastic Alloys & Rubbers, Inc. | TPE | StarMediflex |
| Fiberfil® J-60/30/E/M | Fiberfil® Engineered Plastics Inc. | PP Homopolymer | Fiberfil® |
| KMI PBS KM803 | KMI Group Inc. | PBS | KMI PBS |
| POLYCOMPO PE 5100B | POLYCOMPO Co.,Ltd. | HDPE | POLYCOMPO PE |
| Cereplast Compostables® 3020 | Trellis Bioplastics | PLA | Cereplast Compostables® |
