Order Products : sales@su-jiao.com
FRAGOM G/459 ACR
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | avgb6a_FRAGOM-G-459-ACR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM G G/459 ACR is a flame retardant halogen free polyolefin compound. FRAGOM G G/459 ACR is a flame retardant crosslinkable compound having good temperature index and oxygen index, suitable for cable sheathing and insulation. It is a conveniently grafted compound able to react in presence of moisture and of a catalyst. We suggest our catalyst type MAC/308 PSL to use with low compression and PVC screw. Suitable also for solar cables insulation and sheath adding 5/6% of catalyst GETILAN MAC/300 S. REACTION BETWEEN GRAFTING AND CATALYST These two compounds, separately stored, must be mixed before starting extrusion in the ratio: GRAFTING/CATALYST 95/5 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 12.5 | MPa | IEC 60811 |
| Tensile Strain (Break) | > 240 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (135°C, 168 hr) | 15 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (135°C, 168 hr) | -15 | % | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset | IEC 60540 | ||
| 200°C | 50 | % | IEC 60540 |
| Residual : 200°C | 0.0 | % | IEC 60540 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | % | IEC 60754-1 | |
| Oxygen Index | 22 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 | °C | |
| Cylinder Zone 2 Temp. | 165 | °C | |
| Cylinder Zone 3 Temp. | 180 | °C | |
| Cylinder Zone 4 Temp. | 190 | °C | |
| Cylinder Zone 5 Temp. | 205 | °C | |
| Die Temperature | 210 | °C |
| Extrusion instructions |
|---|
| CROSSLINKING:Crosslinking of the finished product is obtained by: Immersion of the bobbin in hot water at 85/90°C for two hours (up to 1 mm thickness) Steam treatment at 0,15 bar for 6/8 hours Ambient air crosslinking at natural temperature and moisture, after a right number of days depending on climatic conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sarlink® TPE EE-2272N | Teknor Apex Company | TPE | Sarlink® TPE |
| Shandong PA1212 GA4S11 | Shandong Guangyin New Materials Co., Ltd. | Nylon 1212 | Shandong PA1212 |
| Stanyl® TS250F4D | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| AFLAS® 150CS | Asahi Glass Co., Ltd. | Fluorelastomer | AFLAS® |
| Lutene® XL8080NTS | LG Chem Ltd. | PE, Unspecified | Lutene® |
