Order Products : sales@su-jiao.com
Raditer® B N100
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Radici Plastics |
| Trademark: | Raditer® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aqPam0_Raditer-B-N100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PBT injection moulding grade. Natural colour. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.32 | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | ||
| Saturated, 23°C | 0.40 | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 0.10 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2750 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 60.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 8.5 | % | ISO 527-2 |
| Nominal Tensile Strain at Break | 35 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/eA | ||
| -30°C | 4.2 | kJ/m² | ISO 179/eA |
| 23°C | 4.2 | kJ/m² | ISO 179/eA |
| Charpy Unnotched Impact Strength | ISO 179/eU | ||
| -30°C | No Break | ISO 179/eU | |
| 23°C | No Break | ISO 179/eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 165 | °C | ISO 75-2/Bf |
| 1.8 MPa, not annealed | 60.0 | °C | ISO 75-2/Af |
| Vicat Softening Temperature | 180 | °C | ISO 306/B50 |
| Melting Temperature (DSC) | 225 | °C | ISO 3146 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+14 | ohms·cm | IEC 60093 |
| Comparative Tracking Index | 550 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.800 mm | HB | UL 94 | |
| 1.60 mm | HB | UL 94 |
| Additional Information |
|---|
| The value listed as Melting Temperature, ISO 3146, was tested in accordance with ISO 11357-1-3 at a heating rate of 10°C/min. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEXT REGRIND PC/ABS MC8002-300RG | NEXT Specialty Resins, Inc. | PC+ABS | NEXT REGRIND |
| Elastron® D D101.A90.B | Elastron USA, Inc. | SBS | Elastron® D |
| INEOS HDPE T50-1000-178 | INEOS Olefins & Polymers USA | HDPE Copolymer | INEOS HDPE |
| Lucky Enpla LAY1003HM | Lucky Enpla Co LTD | PC+ABS | Lucky Enpla |
| TECACOMP® PEEK 450 GF30 natural 9582 | Ensinger GmbH | PEEK | TECACOMP® |
