Order Products : sales@su-jiao.com
EVALENE® LLDPE LJ25181
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | JG Summit Petrochemical Corporation |
| Trademark: | EVALENE® LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aoprKE_EVALENE-LLDPE-LJ25181.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LLDPE is used for heavy-duty sacks, lamination films, industrial cosmetics, pharmaceutical and food packaging materials. Low Heat Seal Temperatures. Strong Seals. Excellent Tear, Puncture and Impact Strengths. These properties make Evalene® the best choice for LLDPE packaging films. Its outstanding environmental stress crack resistance, good impact properties at low temperatures, and warp resistance also make it attractive for injection molding applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 25 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 185 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 8.00 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | > 1000 | % | ASTM D638 |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYPRO® 5014L HPT-1 | YUHWA Korea Petrochemical Ind. Co., Ltd. | PP Homopolymer | POLYPRO® |
| Sindustris PP H7601 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| SLOVASTER® B GF 40 | Plastcom | PBT | SLOVASTER® |
| TRIBOCOMP® A-3 TS0 | EPIC Polymers | Nylon 66 | TRIBOCOMP® |
| MAJORIS G409/12.5 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
