Order Products : sales@su-jiao.com
Braskem PP D180M
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Braskem America Inc. |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aoM5TZ_Braskem-PP-D180M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sub-group Homopolymer Description Low Gas Fade Applications Suggested Uses Include BCF Multi-Filiments, High Tenacity Continuous Filament Yarn, Fine Denier Staple Fibers |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 18 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 104 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 35.2 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 9.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1310 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 27 | J/m | ASTM D256A |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Elongation of Fibers 4 | 93 | % | ASTM D2256 |
| Takeup Roll Speed | 33.3 | m/sec | Internal Method |
| Tenacity of Fibers 5 | 2.90 | g/denier | ASTM D2256 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 1.3 mm/min |
| 4 . | 3.3 draw ratio, 1,250 m/min roll speed, 225°C spin temperature, D1000/68 |
| 5 . | 3.3 draw ratio, 1,250 m/min roll speed, 225°C spin temperature, D1000/68 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnoform® 300 G2 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| Vyncolit® RX®1-501AN (Nylon) | Vyncolit N.V. | DAP | Vyncolit® |
| Beamset 261 | Arakawa Chemical Industries, Ltd. | Acrylic, Unspecified | Beamset |
| Latilub 88/50-20T | LATI S.p.A. | PEEK | Latilub |
| MAJORIS FW214 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
