Order Products : sales@su-jiao.com
Vistamaxx™ 3000
| Category: | PP Elastomer , Performance Polymer |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | Vistamaxx™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ak0SVT_Vistamaxx-3000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Vedamel 3000 high performance polymer is an olefin-based elastomer produced by ExxonMobil Chemical using proprietary metallocene catalytic technology. It has moderate elasticity, is easy to process, and is compatible with various hydrocarbon-based polymers. It is supplied in the form of granules. |
| General Information | |
|---|---|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.873 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) 2(190°C/2.16 kg) | 3.6 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 33 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 5.22 | MPa | ASTM D638 |
| Fracture | 17.1 | MPa | ASTM D638 |
| 100% strain | 4.59 | MPa | ASTM D638 |
| 300% strain | 4.51 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 48 | % | ASTM D638 |
| Fracture | 1900 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 59.3 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 3 | 62.3 | kN/m | ASTM D624 |
| Additional Information |
|---|
| 按照 FDA 食品接触物质通告 (FCN) 第 832 部分，本产品可在 21 CFR 176.170(c ) 表 2 中所述的 B - H 使用条件下用作与所有类型食品接触的材料或其组成部分 。本产品所用的基础树脂是中国关于食品包装材料用树脂的肯定列表（2011 年 10 月 11 日由中国卫生部签发）中所列的树脂；而且，本产品中可能使用的添加剂 也符合中华人民共和国国家标准 GB9685-2008（即食品容器、包装材料用添加剂使 用卫生标准）。欧盟注释：本产品的成分符合欧盟规范 10/2011 关于食品接触的要求。请与客户服务部联系，索取包含更多详细信息的正式食品法规证书。有关耐化学性方面的数据，请参阅技术文献 (TL)“威达美高性能聚合物的耐化学 品性能”。 |
| Legal statement |
|---|
| 未经埃克森美孚化工书面允许，这种产品包括其产品名称，不得在任何医疗应用领域予以使用或有关详细的产品监管信息，请联系客户服务。 |
| Note Message | |
|---|---|
| 1 . | Properties are expressed in commonly used units of measurement. |
| 2 . | Properties are expressed in commonly used units of measurement. |
| 3 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Texalan® 2 Series 298A | Austin Novel Materials Co. Ltd. | TPU-Polyester | Texalan® 2 Series |
| Celanex® 3200-2FC | Celanese Corporation | PBT | Celanex® |
| Ebalta GM 978 / D | Ebalta Kunststoff GmbH | Epoxy | Ebalta |
| Kingfa PA66-RG001 | Kingfa | Nylon 66 | Kingfa |
| MAJORIS CG308X - 8229 | AD majoris | PP, Unspecified | MAJORIS |
