Order Products : sales@su-jiao.com
Geon™ 120 Series 121A
| Category: | PVC Homopolymer , Polyvinyl Chloride Homopolymer |
| Manufacturer: | Mexichem Specialty Resins, Inc. |
| Trademark: | Geon™ 120 Series |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aiPo4N_Geon-120-Series-121A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Geon® 121A is high molecular weight resin providing good fused film physical properties. It provides good chemical foamability for producing medium to high density foams. It gives good dispersability for easier plastisol preparation. Geon® 121A is recommended for medium to high density foam or solid applications where good fused film physical properties are required such as spread and spray coating, dip coating and molding, slush and rotational molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| K-Value 1 | 74.0 | Internal method | |
| Intrinsic Viscosity | 1.2 | ASTM D1243-60-A | |
| Humidity- Karl Fisher 2 | 0.050 | % | Internal method |
| Volume density | 465 | g/l | |
| Relative Viscosity 3 | 2.65 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Optimal stretch- FF 4 | 20.9 | MPa | ASTM D638 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss- 60 degree fused 5 mins @ 350F 5 | 82 | % | Internal method |
| Transparency-light transmittance 6 | 77 | % | Internal method |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brokfield Viscosity | Internal method | ||
| Initial Viscosity @ 2 rpm 7 | 4.90 | Pa·s | Internal method |
| Initial Viscosity @ 20 rpm 8 | 4.43 | Pa·s | Internal method |
| One Day Viscosity @ 2 rpm 9 | 5.30 | Pa·s | Internal method |
| One Day Viscosity @ 20 rpm 10 | 4.80 | Pa·s | Internal method |
| Cut off the outflow- 95 psi 11 | 72.00 | g/10 min | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| North fineness 12 | 5.00 | Internal method | |
| Residual Vinyl Chloride Monomer 13 | ppm | Internal method | |
| Methanol extractable 14 | 3.0 | % | Internal method |
| polymerization process | Dispersion | ||
| Gel temperature 15 | 69 | °C | |
| Note:The value set forth represent "typical" values and Mexichem Specialty Resins, therefore, makes no representation that the material in any particular shipment will conform to the listed properties.Packaging: This resin is shipped in multi-wall paper bags, net weight 50 lbs, 2500 lbs per pallet. Information shown on the package includes commercial identification number, lot and weight.Geon® ALTC and ASTM D638 (formulation): 100phr Geon® 121A, 57phr DINP, 3phr ESO, and 2phr Therm-Chek SP 120 LOHFGeon® STP 390 (formulation): 100phr Geon® 121A, and 60phr DOP |
| Note Message | |
|---|---|
| 1 . | Correlation, 0.5gm/ 100ml |
| 2 . | Karl Fisher-Geon® 683c |
| 3 . | 1% Cyclohexanone |
| 4 . | With provided formulation |
| 5 . | 60°，FF，ALTC-65 |
| 6 . | FF，ATLC-66 |
| 7 . | Initial, V12,Geon®1010 |
| 8 . | One day, V12,Geon®1010 |
| 9 . | Initial V2,Geon®1253 |
| 10 . | Initial, V20,Geon®1253 |
| 11 . | 95 psi，Geon® 1010 |
| 12 . | Geon® 390 |
| 13 . | Geon® STP 1005 |
| 14 . | Geon® 894 |
| 15 . | FF，ALTC-29 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toyolac® TP60-X02 | Toray Resin Company | ABS | Toyolac® |
| NEXT SIGNATURE POMC MF-300 | NEXT Specialty Resins, Inc. | Acetal (POM) Copolymer | NEXT SIGNATURE |
| Niplene F20 | Soredi S.p.a. | PP Homopolymer | Niplene |
| Latamid 66 H2 G/60 | LATI S.p.A. | Nylon 66 | Latamid |
| ISPLEN® PR 295 C1M | REPSOL | PP Random Copolymer | ISPLEN® |
