Order Products : sales@su-jiao.com
Star T PA6 65E12
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Eurostar Engineering Plastics |
| Trademark: | Star T |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ahzco2_StarTPA665E12.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Star T PA6 65E12 is a Polyamide 6 Injection Molding Resin with Improved Thermal Conductivity |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.99 | g/cm³ | ISO 1183 |
| shrinkage- Flow (4.00 mm) | 1.0 - 1.6 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 85.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.5 | % | ISO 527-2 |
| Flexural Modulus | 7200 | MPa | ISO 178 |
| Flexural Stress | 115 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 4.5 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength (23°C) | 35 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(1.8 MPa, Unannealed, 64.0 mm Span) | 80.0 | °C | ISO 75-2/Af |
| Thermal Conductivity 2 | 1.4 | W/m/K | Internal method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 250 - 260 | °C | |
| Middle Temperature | 260 - 280 | °C | |
| Front Temperature | 260 - 280 | °C | |
| Processing (Melt) Temp | 260 - 280 | °C | |
| Mold Temperature | 60 - 90 | °C |
| Note Message | |
|---|---|
| 1 . | 80x10x4 mm |
| 2 . | In-plane |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polytron® P30B03 | Polyram Ram-On Industries | PP Copolymer | Polytron® |
| MIDILENA III HDPE5305B | ROMPETROL PETROCHEMICALS S.R.L. | HDPE | MIDILENA III |
| UmaPET ULM (aesthetic) | Ester Industries Ltd. | PET | UmaPET |
| Abstron SE45I | Bhansali Engineering Polymers Limited | ABS | Abstron |
| Lupox® SG3250M | LG Chem Ltd. | PBT+PET | Lupox® |
