Order Products : sales@su-jiao.com
Softflex® 0150
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Softflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ahirXx_Softflex-0150.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Softflex 0150 is suitable for overmolding polypropylene and polyethylene. |
| General Information | |
|---|---|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.888 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (235°C/1.0 kg) | 420 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 3.18 mm | 1.7 | % | |
| Across Flow : 3.18 mm | 1.5 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 12 to 18 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 3.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 800 | % | ASTM D412 |
| Tear Strength | 8.76 | kN/m | ASTM D624 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Impact (-30°C) | > 36.2 | J | ASTM D5420 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Regrind | 25 | % | |
| Rear Temperature | 143 to 154 | °C | |
| Middle Temperature | 157 to 168 | °C | |
| Front Temperature | 171 to 177 | °C | |
| Nozzle Temperature | 179 to 185 | °C | |
| Mold Temperature | 15.6 to 23.9 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.621 to 1.21 | MPa | |
| Screw L/D Ratio | 20.0:1.0 | ||
| Screw Compression Ratio | 1.5:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resilience™ HC 8230 | PolyOne Corporation | PVC, Rigid | Resilience™ |
| TRILOY® 200NH | Samyang Corporation | PC+ABS | TRILOY® |
| Nipol® DN3335 | Zeon Chemicals L.P. | NBR | Nipol® |
| Axiall PVC 1601 Clear 7002 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| CP PRYME® Polyethylene PE100LLD-20M | Chase Plastics Services Inc. | LLDPE | CP PRYME® Polyethylene |
