Order Products : sales@su-jiao.com
Jampilen EP548R
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Jam Polypropylene Company |
| Trademark: | Jampilen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | agF0zU_Jampilen-EP548R.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jampilen EP548R is a nucleated, antistatic formulated, high fluidity heterophasic copolymer used for thin-walled injection molding. Items made with Jampilen EP548R exhibit high stiffness, relatively good impact resistance and excellent antistatic properties. Due to its excellent moldability and short cycle times, Jampilen EP548R allows high productivity rates. The finished items show good mechanical properties, and high dimensional stability. Jampilen EP548R is very well suited for the production of thin-walled articles or articles with long flow paths such as flower pots, containers, housewares, filters, filters housings and appliance components. Jampilen EP548R? is suitable for food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 21 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 98 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 27.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 7.0 | % | ASTM D638 |
| Flexural Modulus | 1500 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C | 50 | J/m | |
| 23°C | 85 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 110 | °C | ASTM D648 |
| Vicat Softening Temperature | 149 | °C | ASTM D1525 1 |
| Accelerated Oven Ageing (150°C) | 360 | hr | ASTM D3012 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Precision Polymer N70J | Precision Polymer Engineering Ltd. | NBR | Precision Polymer |
| Spartech Polycom EP6240 | Spartech Polycom | PP Copolymer | Spartech |
| Kepamid® 1325M7 | Korea Engineering Plastics Co., Ltd | Nylon 6 | Kepamid® |
| REV Materials 8010-001 | REV Materials | PP, Unspecified | REV Materials |
| Vistamaxx™ 6502 | ExxonMobil Chemical | PP Elastomer | Vistamaxx™ |
