Order Products : sales@su-jiao.com
ADMER™ NF518E
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Mitsui Chemicals Europe GmbH |
| Trademark: | ADMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aeQg00_ADMER-NF518E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ADMER® NF518E is a maleic anhydride grafted, LLDPE-based grade, which is designed for adhesion between PE and PA or EVOH in tube, sheet, blown and cast film and especially double-bubble applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.1 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 44 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 6.90 | MPa | |
| Break | 14.0 | MPa | |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Area) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 80.0 | °C | ASTM D1525 |
| Peak Melting Temperature | 121 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| FRABUR 42 A | Crosspolimeri S.p.A. | Polyolefin, Unspecified | FRABUR |
| Elastamax™ XL 0131-59(50/50) | PolyOne Corporation | SBC | Elastamax™ |
| KYDEX® V | SEKISUI Polymer Innovations, LLC | PMMA+PVC | KYDEX® |
| LNP™ THERMOCOMP™ DF006ER compound | SABIC Innovative Plastics | PC | LNP™ THERMOCOMP™ |
| LNP™ LUBRICOMP™ RCL36 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
