Order Products : sales@su-jiao.com

ORIENTENE MD 35

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Oriental Petrochemical Company
Trademark:	ORIENTENE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	aeHL6d_ORIENTENE-MD-35.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

ORIENTENE MD 35 is a Polypropylene Homopolymer (PP Homopolymer) material. It is available in Africa & Middle East for injection molding.

Important attributes of ORIENTENE MD 35 are:

Good Processability

Food Contact Acceptable

Typical applications include:

Food Contact Applications

Adhesives/Tapes

General Information
Features	Food Contact Acceptable Good Moldability Good Processability Good Processing Stability Good Stretchability
Uses	Tape
Agency Ratings	EU 2002/72/EC FDA 21 CFR 177.1520(c) 1.1
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183, ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	35	g/10 min	ASTM D1238, ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength
Yield ¹	35.0	MPa	ASTM D638
Yield	35.0	MPa	ISO 527-2/50
Tensile Elongation
Yield ²	7.0	%	ASTM D638
Yield	7.0	%	ISO 527-2/50
Flexural Modulus - 1% Secant ³	1350	MPa	ASTM D790A, ISO 178

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	24	J/m	ISO 180, ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	104	°C	ASTM D648, ISO 75-2/B

Note Message
1 .	50 mm/min
2 .	50 mm/min
3 .	1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
Cheng Yu FV3015	Cheng Yu Plastic Company Limited	Acetal (POM) Homopolymer	Cheng Yu
Daelim Po1y® PH-470	DAELIM INDUSTRIAL CO., LTD.	PP Homopolymer	Daelim Po1y®
Geon™ Vinyl Rigid Extrusion 87707	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Rigid Extrusion
EPO-TEK® H61ND	Epoxy Technology Inc.	Epoxy	EPO-TEK®
Sylvin 29168-65 Clear	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin