TECHNYL® A 248M BLACK 21N Datasheet,Nylon 66,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® A 248M Black 21N is an unfilled polyamide 6.6, heat stabilized, impact modified, for injection moulding. This grade offers an excellent impact resistance, even at low temperature.

General Information
Additive	Impact modifier
Features	Heat Stabilized - Inorganic Impact resistance, high Low temperature impact resistance Good demoulding performance
Uses	Power/other tools Application in Automobile Field Outdoor application Sporting goods Consumer goods application field Footwear
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Injection molding
Resin ID (ISO 1043)	PA66

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (23°C)	1900	MPa	ISO 527-2/1A
Tensile Stress (Break, 23°C)	48.4	MPa	ISO 527-2/1A
Tensile Strain (Break, 23°C)	49	%	ISO 527-2
Flexural Modulus (23°C)	1410	MPa	ISO 178
Flexural Stress (23°C)	65.0	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	87	kJ/m²	ISO 179/1eA

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	263	°C	ISO 11357-3

Injection	Nominal Value	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	265 - 275	°C
Middle Temperature	270 - 280	°C
Front Temperature	280 - 285	°C
Mold Temperature	60 - 80	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For unfilled polyamide, Solvay recommends the use of high alloy steel with a weak chromium content. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For unfilled polyamide, Solvay recommends the use of high alloy steel with a weak chromium content. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Resin Grade	Manufacturer	Category	Trademark
Visiloy™ 2415T2U2	Technical Polymers, LLC	ASA+PC	Visiloy™
Adstif EA5076	PolyMirae	PP Copolymer	Adstif
Akulon® K224-G8	DSM Engineering Plastics	Nylon 6	Akulon®
Eastar™ EN058, Natural	Eastman Chemical Company	Copolyester	Eastar™
LNP™ THERMOCOMP™ DZ004 compound	SABIC Innovative Plastics	PC	LNP™ THERMOCOMP™

Category:	Nylon 66 , Polyamide 66
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	aczBtc_TECHNYLA248MBLACK21N.pdf
PRICE:	Order Products email sales@su-jiao.com