Monprene® RG-12160 XRD1 (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene RG-12160 XRD1 is specifically designed for food contact applications and other regulated markets such as children's and infants products. Monprene RG-12160 XRD1 is a medium hardness, low density grade that is suitable for injection molding and extrusion. Please contact your Teknor Apex rep for a regulatory letter as required.

General Information
Features	Low Specific Gravity Without Fillers Low density smoothness Medium liquidity Lubrication Medium hardness
Uses	Safety equipment Handle Kitchen utensils Washer Pipe fittings Sporting goods Toys Stationery Consumer goods application field Toothbrush handle
RoHS Compliance	RoHS compliance
Appearance	Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.888	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	3.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	62	ASTM D2240
Shore A, 5 seconds, injection molding	60	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
Transverse flow : 100% strain	1.75	MPa	ASTM D412
Flow : 100% strain	3.83	MPa	ASTM D412
Transverse flow : 300% strain	2.86	MPa	ASTM D412
Flow : 300% strain	4.59	MPa	ASTM D412
Tensile Strength ²			ASTM D412
Transverse flow : Fracture	6.78	MPa	ASTM D412
Flow : Fracture	5.21	MPa	ASTM D412
Tensile Elongation ³			ASTM D412
Transverse flow : Fracture	650	%	ASTM D412
Flow : Fracture	390	%	ASTM D412
Tear Strength ⁴			ASTM D624
Transverse flow	31.2	kN/m	ASTM D624
Flow	22.6	kN/m	ASTM D624
Compression Set ⁵			ASTM D395B
23°C, 22 hr	24	%	ASTM D395B
70°C, 22 hr	44	%	ASTM D395B

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	180 - 230	°C
Middle Temperature	180 - 230	°C
Front Temperature	180 - 230	°C
Nozzle Temperature	180 - 230	°C
Processing (Melt) Temp	180 - 230	°C
Mold Temperature	35 - 49	°C
Injection Pressure	1.38 - 5.52	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	182 - 232	°C
Cylinder Zone 2 Temp.	188 - 238	°C
Cylinder Zone 3 Temp.	193 - 243	°C
Cylinder Zone 5 Temp.	199 - 249	°C
Die Temperature	199 - 249	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm

Note Message
1 .	C mold, 510mm/min
2 .	C mold, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	acmrLt_MonpreneRG12160XRD1PRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
TAROMID A 280 MT6	Taro Plast S.p.A.	Nylon 66	TAROMID A
Westlake LLDPE LF2020	Westlake Chemical Corporation	LLDPE	Westlake LLDPE
UNISOFT TPE™ ST-40A-CL-8-01	UNITED SOFT PLASTICS, Inc.	SEBS	UNISOFT TPE™
Argothane® ST-4011FS-85	Argotec LLC	TPU, Unspecified	Argothane®
Durez® 33873	Sumitomo Bakelite North America, Inc.	Phenolic	Durez®