Order Products : sales@su-jiao.com

NuSil R-2634

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	aZksuF_NuSil-R-2634.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings Comment: 0.001 ohm-cm , Low / High Temperature

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

Comment: 0.001 ohm-cm , Low / High Temperature

General Information
Features	Electrically Conductive Fuel Resistant High Heat Resistance
Uses	Aircraft Applications Electrical/Electronic Applications

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 100
Part B	Mix Ratio by Weight: 0.50

Additional Information	Nominal Value	Unit
Cure System	Tin
Extrusion Rate	90.0	g/min
Operating Temperature	-115 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Tan
Density	3.35	g/cm³
Curing Time (23°C)	1.7E+2	hr
Pot Life	180	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	80
Lap Shear Strength	1.34	MPa
Tensile Strength	1.72	MPa
Tensile Elongation at Break	90	%
Tear Strength	8.76	kN/m

Resin Grade	Manufacturer	Category	Trademark
SEETEC PP M1425	LG Chem Ltd.	PP Impact Copolymer	SEETEC PP
Geon™ Vinyl Flexible K85 Natural & Black	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Flexible
Laprene® 830000808	SO.F.TER. SPA	SEBS	Laprene®
Latistat 66-06 G/30	LATI S.p.A.	Nylon 66	Latistat
ULTEM™ 1110F resin	SABIC Innovative Plastics	PEI	ULTEM™