Order Products : sales@su-jiao.com
Monprene® CP-37185
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Monprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aWAbR7_Monprene-CP-37185.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Monprene CP-37185 is a general purpose thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-37185 is a high hardness grade suitable for injection molding and extrusion. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 19 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ISO 294-4 | ||
| Vertical flow direction : 22°C, 48 hours, 3.18mm | 0.95 | % | ISO 294-4 |
| Flow direction : 22°C, 48 hours, 3.18mm | 1.0 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 1 second, injection molding | 89 | ASTM D2240 | |
| Shore A, 5 seconds, injection molding | 85 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| Transverse flow : 100% strain 1 | 4.67 | MPa | ASTM D412 |
| Flow : 100% strain 2 | 7.07 | MPa | ASTM D412 |
| Transverse flow : 300% strain 3 | 5.70 | MPa | ASTM D412 |
| Flow : 300% strain 4 | 7.86 | MPa | ASTM D412 |
| Tensile Strength 5 | ASTM D412 | ||
| Transverse flow : Fracture | 7.51 | MPa | ASTM D412 |
| Flow : Fracture | 8.16 | MPa | ASTM D412 |
| Tensile Elongation 6 | ASTM D412 | ||
| Fracture | 500 | % | ASTM D412 |
| Flow : Fracture | 390 | % | ASTM D412 |
| Tear Strength 7 | ASTM D624 | ||
| Transverse flow | 40.6 | kN/m | ASTM D624 |
| Flow | 46.9 | kN/m | ASTM D624 |
| Compression Set 8 | ASTM D395B | ||
| 23°C, 22 hr | 42 | % | ASTM D395B |
| 70°C, 22 hr | 71 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 182 - 232 | °C | |
| Middle Temperature | 188 - 238 | °C | |
| Front Temperature | 193 - 243 | °C | |
| Nozzle Temperature | 199 - 249 | °C | |
| Processing (Melt) Temp | 199 - 249 | °C | |
| Mold Temperature | 35.0 - 48.9 | °C | |
| Injection Pressure | 1.38 - 5.52 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.172 - 0.689 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Cushion | 3.81 - 25.4 | mm |
| Injection instructions |
|---|
| 无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 182 - 232 | °C | |
| Cylinder Zone 2 Temp. | 188 - 238 | °C | |
| Cylinder Zone 3 Temp. | 193 - 243 | °C | |
| Cylinder Zone 5 Temp. | 199 - 249 | °C | |
| Die Temperature | 199 - 249 | °C |
| Extrusion instructions |
|---|
| 螺杆转速30 - 100 rpm |
| Note Message | |
|---|---|
| 1 . | Mouth die C, 510mm/min |
| 2 . | Mouth die C, 510mm/min |
| 3 . | C mold, 510mm/min |
| 4 . | C mold, 510mm/min |
| 5 . | C mold, 510mm/min |
| 6 . | Mouth die C, 510mm/min |
| 7 . | C mold, 510mm/min |
| 8 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| KPOL-LDPE LD K-1.20/920 | KPOL Chem Co. | LDPE | KPOL-LDPE |
| MAJORIS FFR030X | AD majoris | PP, Unspecified | MAJORIS |
| Magnobond 108 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
| OMIKRON KRT 705 NERO 808 | TECNOPOL | PP Copolymer | OMIKRON |
| Polychim HL10XF | Polychim Industrie S.A.S. | PP Homopolymer | Polychim |
