Order Products : sales@su-jiao.com
KRATON® D0243 K
| Category: | SBC , Styrene Butadiene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aTg5gZ_KRATON-D0243-K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D0243 K is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below.
Kraton D0243 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 20 | g/10 min | ASTM D1238 |
| Antioxidant Additive | 0.35 to 0.48 | % | Internal Method |
| Ash Content 1 | 0.4 to 0.8 | wt% | Internal Method |
| Extractables | < 1.0 | % | Internal Method |
| Polystyrene Content | 31 to 36 | % | Internal Method |
| Solution Viscosity - Toluene, 25%wt (25°C) | 170 to 430 | mPa·s | Internal Method |
| Volatile Matter | < 1.0 | % | Internal Method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Diblock Content | 75.0 | ||
| Styrene/Rubber ratio | 33/67 | ||
| Vinyl Polybutadiene Content | 35 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 1.03 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 1.72 | MPa | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Talc |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirakutoran® TPU E590 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| VTEC™ BG21 | RBI, Inc. | PI, TS | VTEC™ |
| Karina IVORY PVC COMPOUND 837-35/1-E-ERYB | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| LNP™ THERMOTUF™ VF004S compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOTUF™ |
| Akulon® FC-X9200 | DSM Engineering Plastics | Nylon 6 | Akulon® |
