Order Products : sales@su-jiao.com
KW Plastics KW 621-T10
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | KW Plastics |
| Trademark: | KW Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aRRy32_KW-Plastics-KW-621-T10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Copolymer Impact Polypropylene with 10% Talc Post-Consumer Resin Injection Molding CHARACTERISTICS 10% talc reinforced for improved stiffness, heat distortion, shrink rate and cycle time. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Recycled Content |
|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.970 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 24.1 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 11 | % | ASTM D638 |
| Flexural Modulus | 1280 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 100 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ROPOTEN® KB-02-208 | LUKOIL Bulgaria Ltd. | LDPE | ROPOTEN® |
| Shuang-Bang C-0155H | Shuang-Bang Industrial Corp. | Film, TPU | Shuang-Bang |
| Ecomass® 4703ZC76 | Ecomass Technologies | TPU, Unspecified | Ecomass® |
| HiFill® PA6/6 GF30 LE | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| INSULCAST® 502/INSULCURE 9 | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
