Order Products : sales@su-jiao.com

Felix Compounds Talc

Category:	PP, Unspecified , Polypropylene
Manufacturer:	Felix Compounds
Trademark:	Felix Compounds
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	aPLnTx_Felix-Compounds-Talc.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Reinforced thermoplastic compounds are products that have excellent mechanical, physical and thermal properties. Their rigidity, resistance to shock and scratches, to chemical products and UV rays, as well as the ease of transformation of the material through molding, are but a few points to take into consideration in the choice of the material that will correspond to the requirements of your application: polypropylene (PP), polystyrene (PS), polyethylene (PE), different mineral charges (CaCO3, talc, mica) and other materials (glass fibre). Talc This category of products has superior mechanical and thermal properties. It has been conceived to respond to specific demands such as UV rays resistance, color control, flexion and shock resistance.

Message

Reinforced thermoplastic compounds are products that have excellent mechanical, physical and thermal properties. Their rigidity, resistance to shock and scratches, to chemical products and UV rays, as well as the ease of transformation of the material through molding, are but a few points to take into consideration in the choice of the material that will correspond to the requirements of your application: polypropylene (PP), polystyrene (PS), polyethylene (PE), different mineral charges (CaCO3, talc, mica) and other materials (glass fibre).

Talc
This category of products has superior mechanical and thermal properties. It has been conceived to respond to specific demands such as UV rays resistance, color control, flexion and shock resistance.

General Information
Filler / Reinforcement	Talc
Features	Good UV Resistance Shock Resistant

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.928 to 1.29	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.50 to 25	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	20.7 to 27.6	MPa	ASTM D638
Flexural Modulus	1720 to 2650	MPa	ASTM D790B

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	59 to 120	J/m	ASTM D256A

Additional Information	Nominal Value	Unit
Filler Content	5.0 to 45	%

Resin Grade	Manufacturer	Category	Trademark
Alcryn® 2265 TR	Advanced Polymer Alloys	MPR	Alcryn®
ASTALON™ H4000	Marplex Australia Pty. Ltd.	PC	ASTALON™
Arlon® AD255	Arlon-MED	PTFE	Arlon®
Hostaform® LX90Z	Celanese Corporation	Acetal (POM) Copolymer	Hostaform®
Karina WHITE PVC COMPOUND -E 670D10/116-Y	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina