Order Products : sales@su-jiao.com
SMOKEGUARD™ III 1093 NATURAL
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | SMOKEGUARD™ III |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aNU6rB_SMOKEGUARD-III-1093-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A HIGHLY FLAME RETARDED SMOKEGUARD, 75°C RATED, LEAD FREE, LOW SMOKE JACKETING COMPOUND WITH VERY GOOD ELECTICAL PROPERIES FOR PLENUM CABLE CONSTUCTIONS REQUIRING COMPLIANCE TO U.L. SUBJECT 910 (MODIFIED STEINER TUNNEL TEST). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.59 - 1.63 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 65 - 71 | ASTM D2240 | |
| Shaw D, 15 seconds | 53 - 59 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| 0.381 mm | 17.2 | MPa | ASTM D412 |
| 1.91 mm | 15.2 | MPa | ASTM D412 |
| Tensile Elongation | ASTM D412 | ||
| Fracture, 1.91mm | 200 | % | ASTM D412 |
| Fracture, 0.381mm | 180 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -3.00 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant (23°C, 100 MHz) | 3.33 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 0.012 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 51 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 166 | °C | |
| Cylinder Zone 3 Temp. | 171 | °C | |
| Cylinder Zone 4 Temp. | 177 | °C | |
| Cylinder Zone 5 Temp. | 177 | °C | |
| Adapter Temperature | 177 | °C | |
| Melt Temperature | 182 - 191 | °C | |
| Die Temperature | 177 | °C | |
| Extruder Screw Compression Ratio | 3.0:1.0 |
| Extrusion instructions |
|---|
| Melt temperature is critical, at elevated temperatures foaming may occur. It may be necessary to adjust barrel temp to attatin the desired melt temp. Material should be dried prior to use |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TOTAL Polyethylene HDPE SB 1359 | TOTAL Refining & Chemicals | HDPE | TOTAL Polyethylene |
| NORYL™ WCA955 resin | SABIC Innovative Plastics Asia Pacific | PPE+TPE | NORYL™ |
| Arnite® AV2 370 XL | DSM Engineering Plastics | PET | Arnite® |
| Karina CRYSTAL PVC COMP. E 75/325-IS-RG | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| MACOMASS PP MM-PP GF 30 | MACOMASS Verkaufs AG | PP, Unspecified | MACOMASS PP |
