Order Products : sales@su-jiao.com
Adstif HA686J
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | PolyMirae |
| Trademark: | Adstif |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aN360H_Adstif-HA686J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Adstif HA686J is a New Generation Thermoforming Grade for SPPF made by Basell's "new process and additive formulation technology". So, this product shows higher stiffness, impact strength, HDT, and better clarity than General Homo T/F grade. In addition, because Adstif HA686J is Homo PP, this product has better stretchability than General Homo T/F grade [So, suitable for SPPF (Solid Phase Pressure Forming) T/F application]. Adstif HA686J resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 108 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 36.3 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 10 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1750 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 47 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 125 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rotec® ASA E 310 | ROMIRA GmbH | ASA | Rotec® ASA |
| VITAMIDE® BY13BK6088 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| Zytel® 70G13HS1L NC010 | DuPont Performance Polymers | Nylon 66 | Zytel® |
| Kynar® LBG | Arkema | PVDF | Kynar® |
| Innothane® FM-104 | Innovative Polymers, Inc. | TSU | Innothane® |
