Medalist® MD-12283 X (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
This compound is intended for use in medical and healthcare applications, particularly for extruded medical tubing

General Information
Features	High purity Pressure cooker disinfection Ethylene oxide disinfection Anti-gamma radiation Workability, good Kink resistance No kinetic components
Uses	Drug Medical/nursing supplies
Agency Ratings	ISO 10993 Part 5 ISO 13485
Appearance	Translucent
Forms	Particle
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.888	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	19	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shaw A, 1 sec	85	ASTM D2240
Shaw A, 5 seconds	83	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ASTM D412
50% strain	3.96	MPa	ASTM D412
100% strain	4.31	MPa	ASTM D412
300% strain	5.45	MPa	ASTM D412
Tensile Strength (Break)	15.7	MPa	ASTM D412
Tensile Elongation (Break)	760	%	ASTM D412
Tear Strength	49.6	kN/m	ASTM D624
Compression Set			ASTM D395
23°C, 22 hr	34	%	ASTM D395
70°C, 22 hr	49	%	ASTM D395

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	149 - 171	°C
Middle Temperature	171 - 193	°C
Front Temperature	193 - 227	°C
Nozzle Temperature	193 - 227	°C
Processing (Melt) Temp	193 - 227	°C
Mold Temperature	21.1 - 51.7	°C
Back Pressure	0.345 - 1.03	MPa
Screw Speed	50 - 100	rpm
Cushion	3.56 - 25.4	mm

Injection instructions
无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	171 - 188	°C
Cylinder Zone 2 Temp.	182 - 196	°C
Cylinder Zone 3 Temp.	185 - 204	°C
Cylinder Zone 5 Temp.	204 - 227	°C
Die Temperature	204 - 227	°C

Extrusion instructions
螺杆转速30 - 100 rpm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Medalist®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	aLnHvu_Medalist-MD-12283-X-PRELIMINARY-DATA-.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
RANPELEN SB-530	Lotte Chemical Corporation	PP Random Copolymer	RANPELEN
Tenite™ Butyrate 565A2R30016 Natural, Trsp	Eastman Chemical Company	CAB	Tenite™ Butyrate
Flexalloy® 9400-70	Teknor Apex Company	PVC Elastomer	Flexalloy®
Grilon® TSM-30	EMS-GRIVORY	Nylon 66/6	Grilon®
Huafon JF-W-D6055A	Huafon Group Co., Ltd.	PUR, Unspecified	Huafon