Order Products : sales@su-jiao.com
TEDUR® L 9560 S
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | ALBIS PLASTIC GmbH |
| Trademark: | TEDUR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aKZKrN_TEDUR-L-9560-S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TEDUR® L 9560 S is a Polyphenylene Sulfide (PPS) product filled with 50% mineral. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Reflectors. Characteristics include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.82 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 8500 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 65.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 0.80 | % | ISO 527-2 |
| Flexural Modulus | 8300 | MPa | ISO 178 |
| Flexural Stress | 110 | MPa | ISO 178 |
| Flexural Strain at Flexural Strength | 1.5 | % | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -- | 3.0 | kJ/m² | |
| -30°C | 3.0 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -- | 11 | kJ/m² | |
| -30°C | 11 | kJ/m² | |
| Unnotched Izod Impact Strength | 14 | kJ/m² | ISO 180/1U |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index | 175 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.750 mm) | V-0 | UL 94 | |
| Glow Wire Flammability Index (2.00 mm) | 960 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 130 to 140 | °C | |
| Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr | |
| Processing (Melt) Temp | 320 to 340 | °C | |
| Mold Temperature | > 140 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Witcom PA66 10LG-EM | Witcom Engineering Plastics B.V. | Nylon 66 | Witcom PA66 |
| ASI POLYSTYRENE PS 3010-01 | A. Schulman Inc. | PS (HIPS) | ASI POLYSTYRENE |
| Dryflex® 422451S | ELASTO | SBS | Dryflex® |
| Hanwha Total PE P110A | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | HDPE | Hanwha Total PE |
| Iupilon® RS-3001R | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
