TECHNYL® C 218 MX30 BLACK 21N-K Datasheet,Nylon 6,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® C 218 MX30 Black 21N-K is a polyamide 6, reinforced 30 % mineral filler, heat stabilized, for injection moulding. This grade offers an excellent combination between dimensional stability and mechanical properties.

General Information
Filler / Reinforcement	Mineral filler, 30% filler by weight
Additive	heat stabilizer
Features	Heat Stabilized - Inorganic Good dimensional stability Low warpage
Uses	Large household appliances and small household appliances Industrial application Application in Automobile Field Consumer goods application field
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Injection molding
Resin ID (ISO 1043)	PA6-MD30

Physical	Dry	Conditioned	Unit	Test Method
Density	1.36	--	g/cm³	ISO 1183/A
Water Absorption (23°C, 24 hr)	1.0	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Stress (Break, 23°C)	83.0	--	MPa	ISO 527-2/1A
Tensile Strain (Break, 23°C)	5.0	--	%	ISO 527-2
Flexural Modulus (23°C)	5500	--	MPa	ISO 178
Flexural Stress (23°C)	125	--	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Notched Izod Impact (23°C)	2.5	--	kJ/m²	ISO 180

Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	150	--	°C	ASTM D648
Melting Temperature	222	--	°C	ISO 11357-3

Flammability	Dry	Conditioned		Test Method
Flame Rating (3.2 mm)	HB	--		UL 94

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	230 - 235	°C
Middle Temperature	235 - 240	°C
Front Temperature	240 - 250	°C
Mold Temperature	60 - 90	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C.

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C.

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	aCUiKV_TECHNYLC218MX30BLACK21NK.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Tenite™ Acetate 105E1R26033 Clear, Trsp	Eastman Chemical Company	CA	Tenite™ Acetate
SLOVALEN® PH 49 GF 30 TS	Plastcom	PP, Unspecified	SLOVALEN®
Xydar® M-345	Solvay Specialty Polymers	LCP	Xydar®
GAPEX® RPP20EA90NA	Ferro Corporation	PP Homopolymer	GAPEX®
GLS PC MG49	GLS Polymers Pvt. Ltd.	PC	GLS PC