Order Products : sales@su-jiao.com
Grilamid® L XE 10987 nat
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | EMS-GRIVORY |
| Trademark: | Grilamid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aBiKSG_GrilamidLXE10987nat.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Grilamid®L XE 10987 nat is a polyamide 12 (nylon 12) material containing 30% glass beads. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. Grilamid®The main features of L XE 10987 nat are:
Typical application areas include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.22 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Transverse flow | 0.90 | -- | % | ISO 294-4 |
| Flow | 0.80 | -- | % | ISO 294-4 |
| Water Absorption | ISO 62 | |||
| Saturated, 23°C | 1.7 | -- | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 0.80 | -- | % | ISO 62 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 80 | 80 | ASTM D2240 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 2700 | 2600 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 50.0 | 50.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 15 | 15 | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 3.0 | 3.0 | kJ/m² | ISO 179/1eA |
| 23°C | 4.0 | 4.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 30 | 150 | kJ/m² | ISO 179/1eU |
| 23°C | 80 | 100 | kJ/m² | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 1.8 MPa, not annealed | 80.0 | -- | °C | ISO 75-2/A |
| 8.0 MPa, not annealed | 145 | -- | °C | ISO 75-2/C |
| Continuous Use Temperature | ||||
| -- 1 | 90.0 - 120 | -- | °C | ISO 2578 |
| -- 2 | 140 | -- | °C | Internal method |
| Melting Temperature 3 | 178 | -- | °C | ISO 11357-3 |
| Linear thermal expansion coefficient | ISO 11359-2 | |||
| Flow | 8.0E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Lateral | 8.0E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+11 | 1.0E+11 | ohms·cm | IEC 60093 |
| Dielectric Strength | 40 | 40 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | -- | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flammability Classification (0.8 mm) | HB | -- | IEC 60695-11-10, -20 |
| Additional Information | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| ISO Type | PA12+X,GB30,M1H,C18-030 | -- | ISO 16396 |
| Note Message | |
|---|---|
| 1 . | Long Term |
| 2 . | Short Term |
| 3 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3950CT | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| RTP 2800 B-55A Z | RTP Company | TPV | RTP |
| Stanyl® TE200F6 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| NuSil EPM-2421 | NuSil Technology | Silicone | NuSil |
| Abstron AN450M | Bhansali Engineering Polymers Limited | ABS | Abstron |
