Order Products : sales@su-jiao.com
Generic PP Homopolymer - Calcium Carbonate
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | aBKaXe_Generic-PP-Homopolymer---Calcium-Carbonate.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PP Homopolymer - Calcium Carbonate This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 0.948 - 1.26 | g/cm³ | ASTM D792 |
| 23°C | 1.04 - 1.68 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | |||
| 230°C/2.16 kg | 4.7 - 21 | g/10 min | ASTM D1238 |
| 230°C/2.16 kg | 9.6 - 20 | g/10 min | ISO 1133 |
| Molding Shrinkage | |||
| Flow : 23°C | 0.99 - 1.6 | % | ASTM D955 |
| Transverse flow : 23°C | 1.5 - 2.0 | % | ASTM D955 |
| 23°C | 0.70 - 1.1 | % | ISO 294-4 |
| Water Absorption (23°C, 24 hr) | 0.010 - 0.050 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 85 - 101 | ASTM D785 | |
| Durometer Hardness | |||
| 23°C | 73 - 75 | ASTM D2240 | |
| 23°C | 67 - 75 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 1390 - 3100 | MPa | ASTM D638 |
| Tensile Strength | |||
| Yield, 23°C | 17.0 - 33.4 | MPa | ASTM D638 |
| Yield, 23°C | 13.4 - 35.1 | MPa | ISO 527-2 |
| Fracture, 23°C | 14.9 - 17.3 | MPa | ASTM D638 |
| 23°C | 22.9 - 32.0 | MPa | ASTM D638 |
| Tensile Elongation | |||
| Yield, 23°C | 4.0 - 7.8 | % | ASTM D638 |
| Yield, 23°C | 1.7 - 9.1 | % | ISO 527-2 |
| Fracture, 23°C | 5.0 - 53 | % | ASTM D638 |
| Fracture, 23°C | 2.0 - 59 | % | ISO 527-2 |
| Flexural Modulus | |||
| 23°C | 1370 - 3090 | MPa | ASTM D790 |
| 23°C | 1570 - 4510 | MPa | ISO 178 |
| Flexural Strength | ASTM D790 | ||
| 23°C | 34.6 - 49.2 | MPa | ASTM D790 |
| Yield, 23°C | 42.2 - 45.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 25 - 58 | J/m | ASTM D256 |
| 23°C | 1.9 - 4.2 | kJ/m² | ISO 180 |
| Unnotched Izod Impact | |||
| 23°C | 320 - 1300 | J/m | ASTM D256 |
| 23°C | 4.9 - 12 | kJ/m² | ISO 180 |
| Dart Drop Impact (23°C) | 0.339 - 18.8 | J | ASTM D3029 |
| Dart Drop Impact (23°C) | 0.565 - 6.80 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | 95.4 - 121 | °C | ASTM D648 |
| 0.45 MPa, not annealed | 125 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 53.8 - 74.6 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 48.0 - 70.5 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 89.3 - 170 | °C | ASTM D1525 |
| -- | 85.0 - 156 | °C | ISO 306 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 9.8E+15 - 1.0E+16 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 76.0 - 100 | °C | |
| Drying Time | 1.0 - 4.0 | hr | |
| Rear Temperature | 199 - 246 | °C | |
| Middle Temperature | 195 - 247 | °C | |
| Front Temperature | 191 - 247 | °C | |
| Nozzle Temperature | 188 - 238 | °C | |
| Processing (Melt) Temp | 205 - 233 | °C | |
| Mold Temperature | 18.3 - 70.0 | °C | |
| Injection Pressure | 5.86 - 103 | MPa | |
| Back Pressure | 0.241 - 0.776 | MPa | |
| Screw Speed | 75 - 125 | rpm |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PP Homopolymer - Calcium CarbonateThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rotec® ASA S 510 | ROMIRA GmbH | ASA | Rotec® ASA |
| TAIRIPRO K3009AU | Formosa Plastics Corporation | PP Impact Copolymer | TAIRIPRO |
| Terraloy™ BP-20001A | Teknor Apex Company | TPS+Copolyester | Terraloy™ |
| GAPEX® RPP30EB60UL NATURAL | Ferro Corporation | PP Homopolymer | GAPEX® |
| Paracril® CV80 | INSA | NBR | Paracril® |
