Order Products : sales@su-jiao.com
SABIC® STAMAX 20YM240 resin
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | SABIC® STAMAX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | a9qh5v_SABIC-STAMAX-20YM240-resin.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SABIC® STAMAX 20YM240 is a 20% long glass fiber reinforced polypropylene. The glass fibers are chemically coupled to the PP matrix, resulting in high stiffness and strength. The IMDS is 62455287. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-2/1 | ||
| -- | 4800 | MPa | ISO 527-2/1 |
| 80°C | 3400 | MPa | ISO 527-2/1 |
| 120°C | 2800 | MPa | ISO 527-2/1 |
| Tensile Stress | ISO 527-2/1A/50 | ||
| Fracture | 90.0 | MPa | ISO 527-2/1A/50 |
| Fracture, 80°C | 60.0 | MPa | ISO 527-2/1A/50 |
| Fracture, 120°C | 45.0 | MPa | ISO 527-2/1A/50 |
| Tensile Strain (Break) | 2.5 | % | ISO 527-2/50 |
| Flexural Modulus 1 | ISO 178 | ||
| 64.0mm span | 4100 | MPa | ISO 178 |
| 80°C, 64.0mm span | 2850 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C 2 | 18 | kJ/m² | ISO 179/1eA |
| 23°C 3 | 14 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength 4 | ISO 179/1eU | ||
| -30°C | 24 | kJ/m² | ISO 179/1eU |
| 23°C | 44 | kJ/m² | ISO 179/1eU |
| Multi-Axial Instrumented Impact Energy 5(23°C, Energy to Peak Force) | 3.70 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 6(1.8 MPa, Unannealed) | 156 | °C | ISO 75-2/A |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Fiber Content | 20 | % | ISO 3451 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 100 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 230 - 290 | °C | |
| Middle Temperature | 225 - 285 | °C | |
| Front Temperature | 220 - 280 | °C | |
| Nozzle Temperature | 220 - 280 | °C | |
| Processing (Melt) Temp | 220 - 280 | °C | |
| Mold Temperature | 20.0 - 80.0 | °C | |
| Back Pressure | 0.00 - 0.500 | MPa |
| Injection instructions |
|---|
| Screw Speed: Lowest Possible |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 80*10*4mm, Cut |
| 3 . | 80*10*4 mm, Cut |
| 4 . | 80*10*4mm, Cut |
| 5 . | 6.6 m/sec |
| 6 . | 80*10*4mm, Cut |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirathane™ E590 | Miracll Chemicals Co., Ltd. | TPU-Polyester | Mirathane™ |
| Shuman ABS SP791 | Shuman Plastics, Inc. | ABS | Shuman ABS |
| Boltaron 4332 | Boltaron Performance Products | PMMA+PVC | Boltaron |
| Aurora PVC AP3042 Series | Aurora Plastics, Inc. | PVC, Rigid | Aurora PVC |
| OnFlex™ S KA 40A-3S1767 | PolyOne Corporation | TPE | OnFlex™ |
