Order Products : sales@su-jiao.com
Devcon Plastic Welder™ White
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Devcon |
| Trademark: | Devcon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZzkDBc_Devcon-Plastic-Welder-White.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Toughened structural adhesive, after curing, produces superior strength load-bearing bonds to engineered plastics. Intended Use:
Features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Volume | 0.911 | cm³/g | |
| Solid content- by Volume | 100 | % |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Impact Resistance | 11.7 | J/cm |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -55 - 121 | °C |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Work Time (22°C) | 2.0 - 3.0 | min |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Shear Adhesion | ASTM D1002 | ||
| ABS | 8.96 | MPa | ASTM D1002 |
| GBS | 20.7 | MPa | ASTM D1002 |
| Polycarb | 9.65 | MPa | ASTM D1002 |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.10 | g/cm³ |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Elongation (Break) | 15 - 25 | % |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Component a | Mixing ratio by weight: 1.0 Mixing ratio by capacity: 1.0 | ||
| Component B | Mixing ratio by weight: 1.0 Mixing ratio by capacity: 1.0 | ||
| Thermoset Mix Viscosity | 50000 | cP |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cured 7 days @ 75°F |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Curing Time | 24 | hr |
| Note Message | |
|---|---|
| 1 . | Mixed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2285 | RTP Company | PEEK | RTP |
| ACCULOY™ POL063L | ACLO Compounders Inc. | PC+PET | ACCULOY™ |
| DELPET™ 80NR-S | Asahi Kasei Chemicals Corporation | Acrylic (PMMA) | DELPET™ |
| Generic TPU-Polyester - Glass Fiber | Generic | TPU-Polyester | Generic |
| Hylon® N1000L2 | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
