Order Products : sales@su-jiao.com
Fluon® ETFE
| Category: | ETFE , Ethylene Tetrafluoroethylene Copolymer |
| Manufacturer: | Asahi Glass Co., Ltd. |
| Trademark: | Fluon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZuQUOG_Fluon-ETFE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Fluon®ETFE is a thermoplastic fluoropolymer developed by Asahi Glass. It is a copolymer comprising of tetrafluoroethylene (C2F4) and ethylene (C2H4). Fluon®ETFE is a balanced fluoropolymer that has chemical resistance and electrical propertiescomparable to typical fluoropolymers, such as PTFE, PFA and FEP and performs better than ECTFE or PVdF with its improved mechanical strength and very easy mouldability. Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.74 | g/cm³ | ASTM D792 |
| Water Absorption (Equilibrium) | 0.030 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | 50 | ASTM D785 | |
| Durometer Hardness (Shore D) | 67 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 800 | MPa | ASTM D638 |
| Tensile Strength | 48.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 430 | % | ASTM D638 |
| Flexural Modulus | 900 | MPa | ASTM D790 |
| Coefficient of Friction | 0.20 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 150 | °C | |
| Melting Temperature | 260 | °C | |
| CLTE - Flow | 9.4E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+17 | ohms·cm | ASTM D257 |
| Dielectric Strength | 120 | kV/mm | ASTM D149 |
| Dielectric Constant | 2.60 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 60 Hz | 6.0E-4 | ||
| 1 kHz | 8.0E-4 | ||
| 1 MHz | 5.0E-3 | ||
| Arc Resistance | 120 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity | 1000 | Pa·s | ASTM D3835 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® HDPE B5309 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
| Shinko-Lac® ASA TA-15W | Mitsubishi Rayon America Inc. | ASA+PC | Shinko-Lac® |
| Adell Polyamide AW-17 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| Generic EEA | Generic | EEA | Generic |
| PLASTRON™ PPS-GF50-01 | Daicel Polymer Ltd. | PPS | PLASTRON™ |
