Order Products : sales@su-jiao.com

Formolene® HL5010

Category:	UHMWPE , Ultra High Molecular Weight Polyethylene
Manufacturer:	Formosa Plastics Corporation, U.S.A.
Trademark:	Formolene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZuChOT_Formolene-HL5010.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Formolene® HL5010 has good melt strength, excellent stress crack resistance, good rigidity, and excellent impact strength even at low temperatures. These properties make Formolene® HL5010 an excellent resin for large part blow molding applications.

Formolene® HL5010 meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520 for food packaging, covering safe use of polyolefin articles intended for direct food contact.

General Information
Features	Food Contact Acceptable Good Melt Strength Hexene Comonomer High ESCR (Stress Crack Resist.) High Impact Resistance High Rigidity Low Temperature Impact Resistance Ultra High Molecular Weight
Uses	Agricultural Applications Blow Molding Applications Fuel Tanks Industrial Containers Industrial Parts Non-specific Food Applications Pallets Sheet Tanks Water Sports Equipment
Agency Ratings	EC 1907/2006 (REACH) FDA 21 CFR 177.1520
Forms	Pellets
Processing Method	Blow Molding Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.949	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)	10	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance
10% Igepal, Compression Molded, F50	> 600	hr	ASTM D1693B
100% Igepal, Compression Molded, F50	> 600	hr	ASTM D1693A

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, Compression Molded)	24.8	MPa	ASTM D638
Tensile Elongation ²(Break, Compression Molded)	> 600	%	ASTM D638
Flexural Modulus (Compression Molded)	1170	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -90.6	°C	ASTM D746

Note Message
1 .	Type IV, 51 mm/min
2 .	Type IV, 51 mm/min

Resin Grade	Manufacturer	Category	Trademark
Mapex A00200FN	Ginar Technology Co., LTD.	Nylon 66	Mapex
Maxelast® P3885M	Nantong Polymax Elastomer Technology, Co., Ltd	TPE	Maxelast®
Sorona® 3030G NC010	DuPont Performance Polymers	PTT	Sorona®
ColorFast® NY2GF130	LTL Color Compounders, Inc.	Nylon 66	ColorFast®
Daelim Po1y® PP-184	DAELIM INDUSTRIAL CO., LTD.	PP Homopolymer	Daelim Po1y®