Order Products : sales@su-jiao.com

Moplen COAT EP/60 M BIANCO

Category:	PP Copolymer , Polypropylene Copolymer
Manufacturer:	LyondellBasell Industries
Trademark:	Moplen
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZtNeoE_Moplen-COAT-EP-60-M-BIANCO.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Moplen COAT EP/60 M BIANCO is a white, UV and thermal stabilized polypropylene copolymer, in powder form, to be applied onto polypropylene coating prior to water cooling process to improve the surface roughness. In order to get a rough surface, effective as anti-slip for concrete coating, a small, uniform amount of this product has to be applied using a spray gun, vibrator equipment or any other suitable system; indicative quantity to be applied is 40 - 80 g/m2. It is a high stabilized product suitable for pipeline operating temperature up to +145°C (off-shore projects).

Message

Moplen COAT EP/60 M BIANCO is a white, UV and thermal stabilized polypropylene copolymer, in powder form, to be applied onto polypropylene coating prior to water cooling process to improve the surface roughness.
In order to get a rough surface, effective as anti-slip for concrete coating, a small, uniform amount of this product has to be applied using a spray gun, vibrator equipment or any other suitable system; indicative quantity to be applied is 40 - 80 g/m2.
It is a high stabilized product suitable for pipeline operating temperature up to +145°C (off-shore projects).

General Information
Additive	heat stabilizer UV stabilizer
Features	Copolymer Good UV resistance Good thermal aging resistance Thermal Stability
Uses	Pipeline coating Coating application
Appearance	White
Forms	Powder
Processing Method	Coating

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.80	g/10 min	ISO 1133

Extrusion instructions
Recommended melt temperatures: The powder should heated so that the powderfuses with the parent topcoat; however, the temperature of the powder should not exceed 300°C to avoid degradation.

Resin Grade	Manufacturer	Category	Trademark
Axiall PVC CL-6380J	Axiall Corporation	PVC, Rigid	Axiall PVC
Gallonprene® GP540-6005	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®
Formolene® 2510W	Formosa Plastics Corporation, U.S.A.	PP Impact Copolymer	Formolene®
Fortron® 6345L4	Celanese Corporation	PPS	Fortron®
KOCETAL® GF306	Kolon Plastics, Inc.	Acetal (POM) Copolymer	KOCETAL®