Order Products : sales@su-jiao.com
FireCon™ CPE 30-20 RoHS Natural
| Category: | CPE , Chlorinated Polyethylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | FireCon™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZqSmiI_FireCon-CPE-30-20-RoHS-Natural.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The filled flexible thermoplastic CPE sheath compound material is a good choice for low voltage power and cable control cables, providing wire and cable manufacturers with the advantages of thermoplastic extrusion processing without investing in continuous vulcanization (CV) equipment. CPE 30-2 Natural products make it possible for manufacturers to produce colored sheath products. This grade of products can be used to manufacture optical cables used in harsh environments. The harsh external environment requires high-performance sheaths, which are resistant to chemicals, oil and flame retardancy. This grade of product can be colored without affecting its performance. CPE 30-2 NAT products can be processed into a variety of colors using the pigment products of Pulitain. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 10 sec) | 37 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Ultimate) | 12.8 | MPa | ASTM D638 |
| Tensile Stress (100% Strain) | 7.58 | MPa | ASTM D1708 |
| Tensile Elongation 2(Break) | 550 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -20.0 | °C | ASTM D746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (1.91 mm) | 30 | % | ASTM D2863 |
| Additional Information |
|---|
| 注释：推荐的预干燥为在175°-185°F环境下4小时。注释：根据螺旋设计不同，典型加工温度处于320° - 390°F之间。请联系技术服务部，获取特定设备的推荐。注释：模制厚板的典型属性（0.075"）；不能视为技术规格。 |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | Type 4, 510mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| QR Resin QR-1310IM-GF30 | QTR, Inc. | PC+Polyester | QR Resin |
| Vydyne® 85XFS | Ascend Performance Materials Operations LLC | Nylon 66/6 | Vydyne® |
| Bayblend® W85 XF | Covestro - Polycarbonates | ASA+PC | Bayblend® |
| Hostacom EKC 334N BLACK | LyondellBasell Industries | PP Copolymer | Hostacom |
| Hifax TYC 2052P | LyondellBasell Industries | PP Copolymer | Hifax |
