Artenius DESIGN+

Category: PET , Polyethylene Terephthalate
Manufacturer: Artenius
Trademark: Artenius
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: Zpr1mi_Artenius-DESIGN-.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Artenius DESIGN+ is a copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. This resin has been specially designed for complex thermoforming with tailored characteristics of high IV/high melt strength and a very slow rate between crystallization/high clarity and light transmission in very thick wall sections. It is suitable for thick sheet extrusion up to approximately 9 mm in thickness and sealing with high light transmission, excellent brightness and a neutral colour tone.
General Information
Features
  • Copolymer
  • Food Contact Acceptable
  • Good Melt Strength
  • High Clarity
  • High Light Transmission
  • High Viscosity
Uses
  • Sheet
Agency Ratings
  • EU 94/62/EC
  • EU No 10/2011
Forms
  • Pellets
Processing Method
  • Sheet Extrusion
  • Thermoforming
PhysicalNominal ValueUnitTest Method
Specific Gravity 1> 1.39g/cm³
Apparent Density 0.84g/cm³
Viscosity Number (Reduced Viscosity) 84.0 to 88.0ml/gISO 1628
Acetaldehyde < 1.0ppmASTM F2013
Color b < 0.00ASTM D6290
Color L > 85.0ASTM D6290
Crystallinity > 48%
Moisture < 0.20%
Weight - of 20 Chips 320.0mg
ThermalNominal ValueUnit
Melting Temperature 230 to 240°C
ExtrusionNominal ValueUnit
Drying Temperature 155 to 165°C
Drying Time 5.0 to 6.0hr
Melt Temperature 260 to 280°C
Note Message
1 .Crystalline
Resin Grade Manufacturer Category Trademark
PRL NY66-IM1G33 Polymer Resources Ltd. Nylon 66 PRL
ELASTOSIL® R 401/90 Wacker Chemie AG Silicone ELASTOSIL® R
Eraclene® MP 90 C Versalis S.p.A. HDPE Eraclene®
HiFill® TPU 0780 Techmer Engineered Solutions TPU, Unspecified HiFill®
INLUBE PCCF20TF15 Infinity LTL Engineered Compounds PC INLUBE