Order Products : sales@su-jiao.com

SABIC® PP PCGR40

Category:	PP Random Copolymer , Polypropylene Random Copolymer
Manufacturer:	Saudi Basic Industries Corporation (SABIC)
Trademark:	SABIC® PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZngSLe_SABICPPPCGR40.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SABIC® PP grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® PP PCGR40 is a highly transparent polypropylene random copolymer with good antistatic properties. This grade combines improved aesthetics of the finished articles with low temperature processability and a very good organoleptic performance. Part aesthetics are not affected by the lower temperatures, providing for a broader operating window, enabling short cycle times. SABIC® PP PCGR40 results in excellent demoulding characteristics and has a good stiffness to impact ratio. Typical applications: SABIC® PP PCGR40 is typically used for injection moulding of housings for empty disposable 3-part syringes. Other applications demanding a high level of transparency and broad processing window are also possible. Compliance to regulations: SABIC® PP PCGR40 complies with the food contact regulations and the relevant monographs of the US Pharmacopoeia.

Message

SABIC® PP grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity.

SABIC® PP PCGR40 is a highly transparent polypropylene random copolymer with good antistatic properties. This grade combines improved aesthetics of the finished articles with low temperature processability and a very good organoleptic performance. Part aesthetics are not affected by the lower temperatures, providing for a broader operating window, enabling short cycle times. SABIC® PP PCGR40 results in excellent demoulding characteristics and has a good stiffness to impact ratio.

Typical applications:
SABIC® PP PCGR40 is typically used for injection moulding of housings for empty disposable 3-part syringes. Other applications demanding a high level of transparency and broad processing window are also possible.

Compliance to regulations:
SABIC® PP PCGR40 complies with the food contact regulations and the relevant monographs of the US Pharmacopoeia.

General Information
Additive	Clarifier Antistatic property
Features	High purity Antistatic property Fast molding cycle Good sensory characteristics Definition, high Compliance of Food Exposure Good demoulding performance Random copolymer
Uses	Shell Medical/nursing supplies
Agency Ratings	USP Not Rated
Appearance	Clear/transparent
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	40	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1150	MPa	ISO 527-2/1A/1
Tensile Stress (Yield)	29.0	MPa	ISO 527-2/1A/50
Tensile Strain (Yield)	13	%	ISO 527-2/1A/50

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
0°C	2.0	kJ/m²	ISO 179/1eA
23°C	4.5	kJ/m²	ISO 179/1eA
Notched Izod Impact			ISO 180/1A
0°C	2.0	kJ/m²	ISO 180/1A
23°C	4.0	kJ/m²	ISO 180/1A

Resin Grade	Manufacturer	Category	Trademark
RTP 200 GB 40	RTP Company	Nylon 66	RTP
RTP 305 SE	RTP Company	PC	RTP
Akulon® S223-D	DSM Engineering Plastics	Nylon 66	Akulon®
Fluoroplex I 10 - GMP	UNIFLON	PTFE	Fluoroplex
PENTAMID A GV30 HYD2 RC black	PENTAC Polymer GmbH	Nylon 66	PENTAMID A