Order Products : sales@su-jiao.com
Borealis PE LE1120
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Borealis PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Zn6X0W_Borealis-PE-LE1120.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| It is a low density polyethylene compound intended for the insulation of radio frequency coaxial cables. BorcellLE1120 is designed to give the lowest possible cable attenuation by the selection of electrical clean feedstock and contains no additives. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 1 sec) | 45 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 12.2 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 500 | % | ISO 527-2/50 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant | |||
| 1 MHz | 2.28 | IEC 60250 | |
| 1.90 GHz | 2.28 | Internal method | |
| Dissipation Factor | |||
| 1 MHz | 4.0E-5 | IEC 60250 | |
| 1.90 GHz | 1.5E-4 | Internal method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 190 | °C | |
| Cylinder Zone 3 Temp. | 185 | °C | |
| Cylinder Zone 4 Temp. | 145 | °C | |
| Cylinder Zone 5 Temp. | 135 | °C | |
| Adapter Temperature | 135 - 140 | °C | |
| Die Temperature | 220 | °C |
| Extrusion instructions |
|---|
| Screw Cooling: 120°CFlange Temperature: 135°CHead Temperature: 130°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Boda BDF-H2751 | Chenguang Fluoro & Silicone Elastomers Co., Ltd. | Fluorelastomer | Boda |
| CERTENE™ PHM-35R | Muehlstein | PP Homopolymer | CERTENE™ |
| LITEN ML 67 | UNIPETROL RPA | PE Copolymer | LITEN |
| Plenco 05118 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |
| ESTOPLAST XU 4201GY01 | Ester Industries Ltd. | Nylon 6 | ESTOPLAST XU |
