Order Products : sales@su-jiao.com
Generic POP
| Category: | POP , Polyolefin Plastomer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Zk4Lco_Generic-POP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic POP This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.869 - 0.910 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.90 - 3.1 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 42 - 96 | ASTM D2240 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 20 - 51 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Fracture | 29.5 - 58.6 | MPa | ASTM D882 |
| TD : Fracture | 26.3 - 45.4 | MPa | ASTM D882 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 78 - 590 | g | ASTM D1922 |
| TD | 360 - 1300 | g | ASTM D1922 |
| Seal Initiation Temperature | 79.1 - 96.0 | °C |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 45.0 - 87.0 | °C | ASTM D1525 |
| Melting Temperature (DSC) | 55.0 - 108 | °C | ISO 3146 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Gloss | 108 - 134 | ASTM D523 | |
| Gloss | 66 - 145 | ASTM D2457 | |
| Haze | 0.70 - 10 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 204 - 302 | °C |
| Extrusion instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic POPThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NORYL™ SE1GFN1 resin | SABIC Innovative Plastics | PPE+PS | NORYL™ |
| APEX® 82-E419-A | Teknor Apex Company | PVC, Flexible | APEX® |
| DynaMix™ 3200-H | Polymer Dynamix | PEEK | DynaMix™ |
| HydroMed™ D4 | AdvanSource Biomaterials Corp. | PUR-Ether | HydroMed™ |
| KEBAFORM® C 50.0 | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
