Order Products : sales@su-jiao.com

NuSil CF1-3510

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Zilg8I_NuSil-CF1-3510.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Adhesives and Sealants Comment: Fuel / Solvent Resistant

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

General Purpose: Adhesives and Sealants

Comment: Fuel / Solvent Resistant

General Information
Features	Electrically Conductive Fuel Resistant Solvent Resistant
Uses	Adhesives Aircraft Applications Electrical/Electronic Applications Sealants

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 10
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Operating Temperature	-50 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Red
Density	1.50	g/cm³
Viscosity
-- ¹	0.010	Pa·s
-- ²	70	Pa·s
Curing Time (150°C)	0.50	hr
Pot Life	360	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	25
Tensile Strength	1.21	MPa
Tensile Elongation at Break	150	%

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
Maxelast® C4640	Nantong Polymax Elastomer Technology, Co., Ltd	TPE	Maxelast®
Sylvin 6185-80 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
SUSTAMID 6G LL	Röchling Sustaplast SE & Co. KG	Nylon 6	SUSTAMID
WELLAMID Nylon 6600/42 HWCP	CP-Polymer-Technik GmbH & Co. KG	Nylon 66	WELLAMID Nylon
Nypol® PA A3 G30 M2 N1 NTLA014 NR353 MSP	Petropol Industry and Trade of Polymers LTDA	Nylon 66	Nypol® PA