Order Products : sales@su-jiao.com

ORIENTENE MD 12

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Oriental Petrochemical Company
Trademark:	ORIENTENE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZgzeQQ_ORIENTENE-MD-12.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

ORIENTENE MD 12 is a Polypropylene Homopolymer (PP Homopolymer) material. It is available in Africa & Middle East for injection molding.

Important attributes of ORIENTENE MD 12 are:

Good Processability

Food Contact Acceptable

Typical applications include:

Food Contact Applications

Adhesives/Tapes

General Information
Features	Food Contact Acceptable Good Moldability Good Processability Good Processing Stability Good Stretchability
Uses	Tape
Agency Ratings	EU 2002/72/EC FDA 21 CFR 177.1520(c) 1.1
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183, ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	12	g/10 min	ASTM D1238, ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength
Yield ¹	33.0	MPa	ASTM D638
Yield	33.0	MPa	ISO 527-2/50
Tensile Elongation
Yield ²	8.0	%	ASTM D638
Yield	8.0	%	ISO 527-2/50
Flexural Modulus - 1% Secant ³	1350	MPa	ASTM D790A, ISO 178

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	32	J/m	ISO 180, ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	104	°C	ASTM D648, ISO 75-2/B

Note Message
1 .	50 mm/min
2 .	50 mm/min
3 .	1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
AlphaSeal™ 07-193-C NATURAL	AlphaGary	TPE	AlphaSeal™
AVP™ KLL20CP	SABIC Innovative Plastics	PC	AVP™
Hax™ CAT 103	Fainplast Compounds S.r.l	Polyolefin, Unspecified	Hax™
Mafill® CR XG 3544	Ravago Group	PP, Unspecified	Mafill®
Optix® CA-82	Plaskolite West, Inc.	Acrylic (PMMA)	Optix®