Order Products : sales@su-jiao.com
SumiDurez 152
| Category: | Phenolic , Phenolic |
| Manufacturer: | SumiDurez Singapore Pte Ltd |
| Trademark: | SumiDurez |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Zf9b0G_SumiDurez-152.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
152 Phenolic is a two-stage, asbestos-free heat resistant / electrical molding material. It exhibits superior dimensional stability, good strength retention at elevated temperature, and good molded appearance and machinability which account for its widespread use on electrical, telecommunication, and appliance applications. The electrical properties for injection-molded applications are greatly improved relative to asbestos-bearing materials. 152 Phenolic is designed to meat the requirements of Mil-M-14G, Type CFG. ASTM Type 13 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.50 | g/cm³ | ASTM D792 |
| Apparent Density | 0.65 | g/cm³ | ASTM D1895 |
| Bulk Factor | 2.3 | ASTM D1895 | |
| Molding Shrinkage - Flow (Compression Molded) | 0.60 to 1.0 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.30 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Compression Molded) | 9650 | MPa | ASTM D638 |
| Tensile Strength (Yield, Compression Molded) | 55.2 | MPa | ASTM D638 |
| Flexural Strength (Compression Molded) | 75.8 | MPa | ASTM D790 |
| Compressive Strength | 207 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 16 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded) | 191 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength | 15 | kV/mm | ASTM D149 |
| Comparative Tracking Index (CTI) | 190 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.47 mm | V-1 | ||
| 3.05 mm | V-0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ULTEM™ 2312EPR resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| Xuchuan XCW-6021(A) | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Hostaform® FK 2:25 | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| K-Bin Rigid PVC KBD-5087 | K-Bin, Inc. | PVC, Unspecified | K-Bin Rigid PVC |
| Durethan® BKV 30 H2.0 901510 | LANXESS GmbH | Nylon 6 | Durethan® |
