Order Products : sales@su-jiao.com
Estane® 58202 TPU
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZeDV4g_Estane-58202-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane® 58202 is an 85A Polyether-Type Thermoplastic Polyurethane (TPU). Features: Halogenated flame retardant compound with good low temperature properties and cut resistance Uses: Extrusion - wire and cable jacketing and general extrusion where flame retardant propertied are required. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 82 - 88 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 155 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain, 0.762mm | 5.50 | MPa | ASTM D412 |
| 300% strain, 0.762mm | 7.20 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 27.6 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 650 | % | ASTM D412 |
| Tear Strength | |||
| 0.762 mm 1 | 62.8 | kN/m | ASTM D624 |
| Cracking | 19 | kN/m | ASTM D470 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -45.0 | °C | DSC |
| Melting Temperature | 155 | °C | DSC |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 | |
| Oxygen Index | 32 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 174 | °C | |
| Cylinder Zone 2 Temp. | 179 | °C | |
| Cylinder Zone 3 Temp. | 185 | °C | |
| Cylinder Zone 4 Temp. | 188 | °C | |
| Adapter Temperature | 188 | °C | |
| Melt Temperature | 182 | °C | |
| Die Temperature | 188 | °C |
| Extrusion instructions |
|---|
| Dew Point: -40°CScreen Pack Recommendation: 20/40 |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RANPELEN SFO-130A | Lotte Chemical Corporation | PP Homopolymer | RANPELEN |
| RapidCast™ RC-210 | Innovative Polymers, Inc. | TSU | RapidCast™ |
| Sarlink® TPV 2540DN | Teknor Apex Company | TPV | Sarlink® TPV |
| VENYL ST128 - 8689 | AD majoris | Nylon 6 | VENYL |
| Hifax TYC 852X E | LyondellBasell Industries | Polyolefin, Unspecified | Hifax |
