Order Products : sales@su-jiao.com
APEL™ APL5514ML
| Category: | COC , Cyclic Olefin Copolymer |
| Manufacturer: | Mitsui Chemicals America, Inc. |
| Trademark: | APEL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZdgRkd_APEL-APL5514ML.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
APEL™APL5514ML is a cyclic olefin copolymer (COC) material,. This product is available in North America,. APEL™The typical application fields of APL5514ML are: optics/lenses |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (260°C/2.16 kg) | 36 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.60 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 60.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 3200 | MPa | ASTM D790 |
| Flexural Strength | 100 | MPa | ASTM D790 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Water Vapor Transmission Rate | 0.090 | g·mm/m²/atm/24 hr | ASTM F1249 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 25 | J/m | ASTM D256 |
| Unnotched Izod Impact | 10.0 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 125 | °C | ASTM D648 |
| Glass Transition Temperature | 135 | °C | DSC |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Refractive Index | 1.540 | ASTM D542 | |
| Transmittance | 90.0 | % | ASTM D1003 |
| Haze | 0.50 | % | ASTM D1003 |
| Additional Information |
|---|
| TMA: 145°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 NG GF 20 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Plexiglas® LED white 0V606 | Evonik Industries AG | Acrylic (PMMA) | Plexiglas® |
| HIPOLEN P® TA 41G | Hipol a.d. | PP Homopolymer | HIPOLEN P® |
| Formolene® 6730L | Formosa Plastics Corporation, U.S.A. | PP Copolymer | Formolene® |
| Iupilon® ELV2010 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
