Order Products : sales@su-jiao.com
Alpha PVC GW 2450-VW1 NAT 03 LCF
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Za38az_Alpha-PVC-GW-2450-VW1-NAT-03-LCF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A HIGH GRADE, LEAD FREE, 105C DEGREE INSULATION COMPOUND. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 to 1.35 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore D | 55 to 61 | ||
| Shore D, 15 sec | 41 to 47 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| 0.381 mm | 20.0 | MPa | |
| 1.91 mm | 17.2 | MPa | |
| Tensile Elongation | ASTM D412 | ||
| Break, 1.91 mm | 250 | % | |
| Break, 0.381 mm | 230 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1(136°C, 168 hr) | 0.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2(136°C, 168 hr) | -20 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -12.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 6.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Constant | ASTM D150 | ||
| 23°C, 1 MHz | 2.80 | ||
| 23°C, 100 MHz | 2.70 | ||
| Dissipation Factor | ASTM D150 | ||
| 23°C, 1 MHz | 0.013 | ||
| 23°C, 100 MHz | 0.015 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 27 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 154 | °C | |
| Cylinder Zone 2 Temp. | 166 | °C | |
| Cylinder Zone 3 Temp. | 171 | °C | |
| Cylinder Zone 4 Temp. | 177 | °C | |
| Cylinder Zone 5 Temp. | 177 | °C | |
| Adapter Temperature | 177 | °C | |
| Melt Temperature | 174 to 179 | °C | |
| Die Temperature | 177 | °C |
| Note Message | |
|---|---|
| 1 . | Thickness: 15 mil |
| 2 . | Thickness: 15 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIREX® Compound 3500G20 | Samyang Corporation | PC | TRIREX® Compound |
| AXELERON™ CC 3485 NT CPD | The Dow Chemical Company | HDPE | AXELERON™ |
| DENKA STYROL MF-21-321 | Denka Company Limited | PS (GPPS) | DENKA STYROL |
| K-Flex 3340 OR | Technovinyl Polymers India Ltd. | PVC Elastomer | K-Flex |
| Mitsui EPT™ 2060M | Mitsui Chemicals, Inc. | EPDM | Mitsui EPT™ |
