Order Products : sales@su-jiao.com
AEI TP-0870
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | AEI Compounds Limited |
| Trademark: | AEI |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZZxfk0_AEI-TP-0870.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Flexible, low-smoke, halogen-free, flame retardant thermoplastic compound for cable insulation and sheathing. This is a very flexible flame-retardant low-smoke thermoplastic compound. The compound meets the requirements of limited toxic and corrosive fume emission, being designed to meet the general requirements of BS7655 Section 6.1 type LTS 1. TP-0870 is available in the following versions:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.46 | g/cm³ | BS 2782 620A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | |||
| Shaw A | 96 | ||
| Shaw D | 56 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 11.5 | MPa | IEC 60811-1-1 |
| Tensile Strain | |||
| Fracture | 270 | % | IEC 60811-1-1 |
| Fracture, -30°C 1 | 60 | % | IEC 60811-1-4 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength | IEC 60811-1-2 | ||
| 70°C, 168 hr, in water | -25 | % | IEC 60811-1-2 |
| 100°C, 168 hr | -5.0 | % | IEC 60811-1-2 |
| Change in Tensile Strain at Break | IEC 60811-1-2 | ||
| 70°C, 168 hr, in water | -12 | % | IEC 60811-1-2 |
| 100°C, 168 hr | -12 | % | IEC 60811-1-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deformation (80°C) | 30 | % | IEC 60811-3-1 |
| Cold shock (-30°C) | pass | IEC 60811-1-4 | |
| Cold Bend (-30°C) | pass | IEC 60811-1-4 | |
| Temperature index | 270 | °C | ISO 4589-3 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 10 | N/mm | BS 6469 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 160 | °C |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 32 | % | ISO 4589-2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 120 | °C | |
| Cylinder Zone 2 Temp. | 130 | °C | |
| Cylinder Zone 3 Temp. | 140 | °C | |
| Cylinder Zone 4 Temp. | 150 | °C | |
| Melt Temperature | < 170 | °C | |
| Die Temperature | 160 | °C |
| Extrusion instructions |
|---|
| An extruder with an L/D ratio (length/diameter) of 15-24 and an extruder screw with a compression ratio 1.5:1 or less are recommended. |
| Note Message | |
|---|---|
| 1 . | pass |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ranger PBT PBT-201-G10 202 | Beijing Ranger Chemical Co., Ltd. | PBT | Ranger PBT |
| UNITREX® C30 | Nytef Plastics, Ltd. | PEEK | UNITREX® |
| Bergadur™ BR3300-8025 RS NC012 | PolyOne Corporation | PBT | Bergadur™ |
| Borealis PE FA7224 | Borealis AG | LDPE | Borealis PE |
| Loyblend® YA-1004 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | ABS+PBT | Loyblend® |
