Order Products : sales@su-jiao.com
RTP 6003-55A UV
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZYer4m_RTP-6003-55A-UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Over Molding Grade - UV Stabilized |
| General Information | |
|---|---|
| Additive |
|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.980 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 56 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain | 1.59 | MPa | ASTM D412 |
| 100% strain | 1.90 | MPa | ASTM D412 |
| 300% strain | 2.76 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 4.83 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 900 | % | ASTM D412 |
| Tear Strength 1 | 25.4 | kN/m | ASTM D624 |
| Compression Set 2 | ASTM D395B | ||
| 23°C, 22 hr | 19 | % | ASTM D395B |
| 158°C, 22 hr | 65 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Processing (Melt) Temp | 177 - 216 | °C | |
| Mold Temperature | 15.6 - 48.9 | °C | |
| Injection Pressure | 27.6 - 68.9 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | C mould |
| 2 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu Elastomer KE-941U | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| LNP™ STAT-KON™ DX05301C compound | SABIC Innovative Plastics Asia Pacific | PC | LNP™ STAT-KON™ |
| PLUSTEK PB300G3 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
| Hostacom HYG 343L 356015 | LyondellBasell Industries | PP Homopolymer | Hostacom |
| Stat-Tech™ PA66 C20 black (EM00000364BI) | PolyOne Corporation | Nylon 66 | Stat-Tech™ |
