Order Products : sales@su-jiao.com
Filter-bond™ E-3264
| Category: | TS, Unspecified , Thermoset, Unspecified |
| Manufacturer: | Hapco Inc. |
| Trademark: | Filter-bond™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZYbNGw_Filter-bond-E-3264.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Filter-bond is a series of casting and potting compounds ideally suited for medical and food contact applications. This Filter-bond E-SERIES is manufactured to ultra-high quality standards and has been used by customers to pass biocompatibility requirements. FILTER-bond E-3264 is a liquid, two component, flexible, extremely tough adhesive potting and sealing compound. FILTER-bond E-3264 has a long working life and is good in aqueous environments. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.968 | g/cm³ | ASTM D4669 |
| Molding Shrinkage - Flow | 0.10 to 0.30 | % | ASTM D2566 |
| Weight - per cubic inch | 16 | g |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time 1(25°C) | 3.0 | hr | ASTM D2971 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | < 2070 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 1.38 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 550 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 2 | 5.78 | kN/m | ASTM D624 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Part B | Mix Ratio by Weight: 360, Mix Ratio by Volume: 300 | ||
| Thermoset Mix Viscosity (25°C) | 9600 | cP | ASTM D4878 |
| Demold Time (21°C) | 2900 to 4300 | min |
| Note Message | |
|---|---|
| 1 . | 100 g |
| 2 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen S33LS | Shazand (Arak) Petrochemical Corporation | PP Homopolymer | Moplen |
| NatureFlex™ 95NP | Innovia Films Ltd. | Cellulose, Regenerated | NatureFlex™ |
| Hostalen PP HP1886 | LyondellBasell Industries | PP Random Copolymer | Hostalen |
| LNP™ THERMOTUF™ RF002I compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOTUF™ |
| Moplen EP542R | PolyMirae | PP Impact Copolymer | Moplen |
