Order Products : sales@su-jiao.com
AMPLIFY™ TY 1251
| Category: | MAH-g , Functional Polymer |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | AMPLIFY™ TY |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZV20Ce_AMPLIFY-TY-1251.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
AMPLIFY™ TY 1251 Functional polymer is a maleic anhydride grafted (MAH) polyolefin which is designed for the tie layer market segment. AMPLIFY* TY 1251 is a high melt strength polymer with a grafting level which is specifically designed for multi-layer pipe applications where high melt strength, good adhesion to various substrates, and toughness are desired properties. This grade is fully formulated and designed to be used directly in the application. Main Characteristics:
Complies with:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.55 | g/10 min | ASTM D1238 |
| MAH Graft Level 1 | Low | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxidation Temperature - (OIT) @220°C | 107 | °C | ASTM D3350 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Break) | 14.5 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 500 | % | ASTM D638 |
| Flexural Modulus - 2% Secant 4 | 207 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 5(23°C) | No Break | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 123 | °C | Internal Method |
| Note Message | |
|---|---|
| 1 . | Low: <0.25 wt%, Medium 0.25-0.5, High >0.5 wt% |
| 2 . | Molded in accordance with ASTM D4703. |
| 3 . | Molded in accordance with ASTM D4703. |
| 4 . | Molded in accordance with ASTM D4703. |
| 5 . | Molded in accordance with ASTM D4703. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wellamid® GF1864-WBK1 | Wellman Engineering Resins | Nylon 6 | Wellamid® |
| APEX® RE 9118A UV | Teknor Apex Company | PVC, Rigid | APEX® |
| FORMULA P ELAN 5220 M2 | Putsch Kunststoffe GmbH | PP, Unspecified | FORMULA P |
| Hax™ HF 018/13 | Fainplast Compounds S.r.l | Polyolefin, Unspecified | Hax™ |
| Plexiglas® Resist zk20 | Evonik Industries AG | Acrylic (PMMA) | Plexiglas® |
