Order Products : sales@su-jiao.com
Estaloc® 59600 RETPU
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estaloc® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZUhkDI_Estaloc-59600-RETPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estaloc® 59600 RETPU is a Polyester-Type Reinforced Engineered Thermoplastic (RETP). Features: Fast Cycling, Dimensional Stability, Durability, Aesthetics, Low Temperature Impact Uses: Injection Molding |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.66 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 5 sec) | 77 to 83 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (0.762 mm) | 5490 | MPa | ASTM D638 |
| Tensile Strength (0.762 mm) | 96.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 0.762 mm) | 13 | % | ASTM D638 |
| Flexural Modulus (0.762 mm) | 4490 | MPa | ASTM D790 |
| Flexural Strength (0.762 mm) | 126 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C, 0.762 mm | 180 | J/m | |
| 23°C, 0.762 mm | 430 | J/m |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Dew Point | -40.0 | °C | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 216 | °C | |
| Middle Temperature | 227 | °C | |
| Front Temperature | 238 | °C | |
| Nozzle Temperature | 243 | °C | |
| Processing (Melt) Temp | 243 | °C | |
| Injection Pressure | 69.0 to 103 | MPa | |
| Injection Rate | Slow-Moderate | ||
| Holding Pressure | 35.0 to 69.0 | MPa | |
| Back Pressure | 0.345 | MPa | |
| Screw Speed | 30 to 80 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RELENE® 24FS040 | Reliance Industries Limited | LDPE | RELENE® |
| TEREZ PA 6.6 7500 GF 35 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Clariant Nylon 6 PA-211TF20 | Clariant Corporation | Nylon 6 | Clariant Nylon 6 |
| DIALAC® S510 | UMG ABS, Ltd. | ASA | DIALAC® |
| INLUBE PBTCF30TF15 | Infinity LTL Engineered Compounds | PBT | INLUBE |
