Order Products : sales@su-jiao.com

EMAC® SP2409

Category:	EMA , Ethylene Methyl Acrylate Copolymer
Manufacturer:	Westlake Chemical Corporation
Trademark:	EMAC®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZSh6ZG_EMAC-SP2409.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Application/Uses

Extrusion Coating

Flexible Packaging

Tie-layers

Compatibilizer

Heat Seal Layer

High C.O.F. Non-Skid Surfaces

Attributes

Good adhesion or compatibility to various substrates

Good heat & RF sealing

Low temperature toughness

Soft, flexible, tough without plasticizers

High coefficient of friction

Product Description
Westlake EMAC® SP2409 is a 20% EMA copolymer designed for extrusion coating, tie-layers, and extrusions where flexibility, compatibility, low heat seal temperatures, or high coefficient of riction are required. SP2409 provides excellent adhesion to polyolefins, polyesters, and other polymers while providing utstanding low temperature performance.

General Information
Features	Copolymer Food Contact Acceptable Good Adhesion Good Flexibility Good Heat Seal High Friction Low Temperature Toughness Soft
Uses	Coating Applications Packaging Tie-Layer
Agency Ratings	FDA 21 CFR 177.1340
Forms	Pellets
Processing Method	Extrusion Extrusion Coating

Physical	Nominal Value	Unit	Test Method
Density	0.941	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	8.0	g/10 min	ASTM D1238
Methyl Acrylate Content	20.0	wt%	Internal Method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	39		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Break)	8.27	MPa	ASTM D638
Tensile Elongation ²(Break)	600	%	ASTM D638

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -72.8	°C	ASTM D746
Vicat Softening Temperature	51.1	°C	ASTM D1525
Melting Temperature (DSC)	82.0	°C	ASTM D3418

Note Message
1 .	Type IV, 500 mm/min
2 .	Type IV, 500 mm/min

Resin Grade	Manufacturer	Category	Trademark
ResinDirect HIPS8	ResinDirect	PS (HIPS)	ResinDirect
Sasol Polymers PP CPV340	Sasol Polymers	PP Impact Copolymer	Sasol Polymers PP
Exelene® HDPE 5100M	Montachem International, Inc.	HDPE, HMW	Exelene® HDPE
Keltan® 4869	LANXESS Buna GmbH	EPDM	Keltan®
PENTAMID A GV30 L8 H schwarz	PENTAC Polymer GmbH	Nylon 66	PENTAMID A