Order Products : sales@su-jiao.com
EPIGUM DPE/73 F
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | EPIGUM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZPXRrg_EPIGUM-DPE-73-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EPIGUM DPE/73 F is a thermoplastic elastomer. EPIGUM DPE/73 F is a TPV vulcanized rubber workable as thermoplastic compound. Suitable also for food contact. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Moisture | 0.030 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 73 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 7.60 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 470 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (100% Strain) | 13 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 2.90 | MPa | ASTM D412 |
| Tear Strength 2(23°C) | 32.7 | kN/m | ASTM D624 |
| Compression Set (100°C, 22 hr) | 37 | % | ASTM D395B |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Mass (121°C, 24 hr) | 77 | % | ASTM D471 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -60.0 | °C | ASTM D746 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 90.0 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Cylinder Zone 1 Temp. | 180 | °C | |
| Cylinder Zone 2 Temp. | 185 | °C | |
| Cylinder Zone 3 Temp. | 190 | °C | |
| Cylinder Zone 4 Temp. | 200 | °C | |
| Cylinder Zone 5 Temp. | 215 | °C | |
| Die Temperature | 220 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMLLOY PJ701 | Polyram Ram-On Industries | ASA+ABS | RAMLLOY |
| Sahara™ Films | Eastman Chemical Company | Polyester, TP | Sahara™ |
| ESENTTIA 40H92N | Polipropileno del Caribe S.A. | PP Homopolymer | ESENTTIA |
| KOPPS® S13A65 | Kolon Plastics, Inc. | PPS | KOPPS® |
| ULTEM™ ATX200R resin | SABIC Innovative Plastics | PEI+PCE | ULTEM™ |
