Order Products : sales@su-jiao.com

TOTAL Polyethylene XSene® HDPE XRC20 Orange

Category:	HDPE , High Density Polyethylene
Manufacturer:	TOTAL Refining & Chemicals
Trademark:	TOTAL Polyethylene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZMPVho_TOTAL-Polyethylene-XSene-HDPE-XRC20-Orange.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
HDPE XRC20 Orange is a high performance hexene-based orange compound, with a MRS 10 MPa - PE 100 classification, and primarily intended for gas pipe applications. HDPE XRC20 Orange key characteristics are superior resistance to slow crack growth and rapid crack propagation ensuring safe and long-term network operation a broad bimodal molecular weight distribution offering easy processing for perfect pipes and fittings an optimised formulation of additives and finely dispersed pigments providing outstanding long-term stability in service. Designation ISO 1872-PE,E/M-ACGHL,50-T003

Message

HDPE XRC20 Orange is a high performance hexene-based orange compound, with a MRS 10 MPa - PE 100 classification, and primarily intended for gas pipe applications.

HDPE XRC20 Orange key characteristics are

superior resistance to slow crack growth and rapid crack propagation ensuring safe and long-term network operation

a broad bimodal molecular weight distribution offering easy processing for perfect pipes and fittings

an optimised formulation of additives and finely dispersed pigments providing outstanding long-term stability in service.

Designation ISO 1872-PE,E/M-ACGHL,50-T003

General Information
Additive	Unspecified Additive
Features	Bimodal Molecular Weight Distribution Good Crack Resistance Good Processability Hexene Comonomer
Uses	Fittings Piping
Agency Ratings	PPI PE-100
Appearance	Orange
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.949	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)	0.30	g/10 min	ISO 1133
Water Content ¹	< 300	ppm	EN 12118

Thermal	Nominal Value	Unit	Test Method
Thermal Stability (200°C)	> 20	min	ISO 11357-6

Additional Information	Nominal Value		Test Method
ISO Type	PE,E/M-ACGHL,50-T003		ISO 1872
Pigment Dispersion	< 3.00		ISO 18553

Injection	Nominal Value	Unit
Processing (Melt) Temp	200 to 260	°C

Extrusion	Nominal Value	Unit
Melt Temperature	190 to 220	°C

Note Message
1 .	Measured at the stage of compound manufacturing

Resin Grade	Manufacturer	Category	Trademark
Starpylen MB006SU	Eurostar Engineering Plastics	PP, Unspecified	Starpylen
SUPRAN® LFT PP 1340E	SAMBARK	PP, Unspecified	SUPRAN® LFT PP
Wondel® P PR0	Nanjing Julong Engineering Plastics Co., LTD	PP, Unspecified	Wondel® P
Dynaflex™ G2730	PolyOne Corporation	TPE	Dynaflex™
Karina GREEN COLOR CONCENTRATE 40/308-FC-LMP	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina